JavaScript is disabled please enable it in your browser

FIBERGLASS GRATING

• Fiberglass grating is an excellent choice for car washes due to its exceptional strength, chemical resistant characteristics, and slip resistant grit top.
• All of our gratings have grit adhered to the the top surface to increase its slip resistant characteristics.

• All of our gratings are ISO polyester, resin fiberglass which is widely accepted for its good chemical resistant characteristics.
• Note: Carbide tipped blade is needed for cutting. We recommend safety glasses and a breathing mask when cutting.

MOLDED FIBERGLASS GRATING

with top grit

This is the most common form of grating used in car washes, our top grit reduces slipperiness. More of a finished look than the Pultruded (see below).

Molded 1½" x 1½"
1½" H with Top Grit

3ft. x 10ft. Yellow or Gray Square Molded w/Grit

PULTRUDED FIBERGLASS GRATING

with top grit

This is rated for higher load capacity than the molded one. Also comes with grit surface to reduce slipperiness.
Pultrueded Grating with Top Grit

3 ft. x 10ft. Yellow or Gray with Grit

MOLDED FIBERGLASS FLAT TOP

with top grit

This is molded fiberglass with 1/8" solid top and grit, it is recommended to be used under car wash dryers to prevent water from blowing out of conveyor pit.
Flat Top Grating with Top Grit

3ft. x 10ft. Yellow or Gray Flat Top Grating w/Grit

MOLDED FIBERGLASS GRATING

with Decorative Solid Flat Top

NO GRIT

< PREV | NEXT >

FIBERGLASS GRATING

MOLDED FIBERGLASS GRATING

with top grit

PULTRUDED FIBERGLASS GRATING

with top grit

MOLDED FIBERGLASS FLAT TOP

with top grit

MOLDED FIBERGLASS GRATING

with Decorative Solid Flat Top